Tips for Air Conditioning Installation
Air conditioning is one of the great boons of the modern world. When you’re adding air conditioning to your home or replacing an existing system, the most reliable and hassle-free way to get the job done is always to put it in the hands of experienced professionals. If you’d like to try installing your own air conditioning unit, though, you may find the following advice useful. Please note that air conditioning installation is not a job that should be rushed! You should carefully review all of the instructions you have and plan out the full process in advance.
1) Placing The Indoor Equipment
Where you choose to install the cooling system’s indoor unit will play a large role in determining how effective it is. Ideally, you want a clear space free of potential obstructions that is as centrally located as possible. Besides making installation easier, this will also ensure that you get proper air flow once the installation is complete.
2) The Outdoor Unit
As with the indoor portion of the air conditioning system, the outdoor equipment needs to be properly sited for best results. Even though modern air conditioners are built to be extremely durable, you should still find a spot that’s shaded for as much of the day as possible in order to keep the unit cool. The unit needs to be oriented so that the air exhaust is facing away from the house. All outdoor units need a certain amount of clear space around them, and you’ll need to make sure they’re installed on a stable, level surface.
3) Working with Copper Pipes
Hooking up the various parts of a residential air conditioning system calls for running a lot of copper pipe. The most common diameter involved is half-inch pipe, although your setup may differ. Take great care to avoid crimping or flattening pipe when you bend it to fit it into place. Whenever you’re making significant bends, remove any pipe insulation that may already be attached so that you can see the pipe clearly. Use the widest possible bending radius in the space available. Replace the pipe insulation once the pipe is positioned and secure it with waterproof tape.
4) Setting Up Drainage
The indoor unit in your system will have a water drain pipe coming out of the drip tray. You’ll need to run a drain pipe from this output through the external wall of your home and to a proper drainage area. This allows excess water to exit your home safely without causing damage. Bear in mind that most air conditioner units can put out up to 4 pints of water on the hottest, most humid days.
5) Making Solid Connections
Once the major equipment is in place, the biggest part of an air conditioner installation is joining up all of the pipes required. Use a lubricating oil between each pipe facing and the brass cone it connects with. Tighten each joint with a wrench.
Insulation is vital once the piping system is complete. Each connection should be considered especially important; make sure they get ample insulation to keep the system efficient. Run a leak check on the entire system before using it; refrigerant leaks can be expensive and even dangerous!
While the specific details of a residential air conditioner installation will vary widely depending on the size and layout of the house and the equipment being used, you should be able to get some good use out of the general guidelines provided here regardless of your individual situation. Remember to closely follow the instructions provided by your equipment manufacturer and take the time to set the system up properly. If you work through the job with care, you’ll be ready to fire up the thermostat and start enjoying a cool, livable home as soon as you’re finished!